- Početna
- Pro audio
- Mikrofonski dodaci
- DPA VO4099B d:vote 4099 Clip Microphone for Bass
DPA VO4099B d:vote 4099 Clip Microphone for Bass
by DPAFor Live Sound & Recording, Mounting System Designed for Double Bass, 5.5" Adjustable Gooseneck, MicroDot Connector
Includes XLR Adapter with Belt Clip, Detachable Cable
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- DPA Microphones d:vote 4099B Clip Microphone for Bass with XLR Adapter
- XLR Adapter
- Mounting Clip for DPA 4099B Clip Microphone for Acoustic Bass
- Belt Clip
The d:vote 4099B Clip Microphone for Bass with XLR Adapter from DPA Microphones is designed to clip onto your double bass on the E and G strings below the bridge with the included mounting clip while having no impact on your acoustic sound. It can be used for both live sound and recording purposes. The microphone itself is a supercardioid condenser with a 5.5" adjustable gooseneck for ease in positioning. It also features a detachable cable, allowing you to attach your mic to your bass before connecting it. The 4099B terminates in a MicroDot connector, allowing compatibility with DPA's connection adapters for use with a variety of third-party wireless systems. An XLR adapter with a belt clip is included for use in a wired system with 48-volt phantom power.
Transducer Type | Condenser |
Polar Pattern | Supercardioid |
Principle of Operation | Pressure Gradient |
Frequency Range | 20 Hz to 20 kHz +/- 2 dB, 20 cm Distance: 80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz |
Sensitivity | 6 mV/Pa; -44.5 dB Reference: 1 V/Pa (Nominal, +/- 3 dB) |
Equivalent Noise Level | Typ. 23 dB(A) Reference: 20 µPa (Maximum 26 dB(A)) (A-Weighted) |
Signal to Noise Ratio | 71 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL) |
Total Harmonic Distortion (THD) | < 1 % up to 123 dB SPL peak < 1 % up to 120 dB SPL RMS sine |
Dynamic Range | 100 dB |
Maximum SPL | 142 dB (Peak Before Clipping) |
Output Impedance | MicroDot: 30 to 40 Ω XLR: 100 Ω |
Cable Drive Capability | XLR: 984' (300 m) |
Output Balance Principle | Signal balanced with XLR adapter |
CMRR | XLR Adapter: > 60 dB at 50 Hz to 15 kHz |
Power Supply | Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems 48 V phantom power ±4 V with XLR adapter |
Current Consumption | MicroDot: 1.5 mA XLR Adapter: 3.5 mA |
Connector | MicroDot XLR Adapter Included |
Polarity | Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter) |
Operating Temperature | -40° to 113°F (-40° to 45°C) |
Relative Humidity | Up to 90% |
Cable Length | 6' (1.8 m) |
Gooseneck | Length: 5.5" (140 mm) |
Microphone Length | 1.8" (45 mm) |
Weight | 1.16 oz (33 g) |
Packaging Info | |
---|---|
Package Weight | 1.2 lb |
Box Dimensions (LxWxH) | 9.7 x 5.7 x 3.0" |