Zoom F8n Pro
by Zoom32-bit float recording technology
8-channel/10-track field audio recorder/mixer
Records in BWF-compliant WAV format up to 192kHz/32-bit float
8 discrete inputs with locking Neutrik XLR/TRS combo connectors
High quality mic preamps with up to 75 dB gain and less than -127 dBu EIN
Switchable +4dB inputs with mic/line options for both XLR and TRS
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Zoom F8n 8-Input / 10-Track Multitrack Field Recorder
- AD-19 12V Power Adapter
- Set of Download Codes for Cubase LE and WaveLab LE
DISPLAY
The F8n Pro's 2.4-inch full-color backlit display with monochromatic mode makes field work equally easy in low or direct lighting.
SLATE SWITCH
The F8n Pro's has a built-in slate mic for recording comments as well as the ability to output a variable frequency tone signal.
TRANSPORT CONTROLS
The control panel features stop, search forward and search backward keys as well as illuminated play/pause and record buttons.
INPUT CONTROLS
Each input features a built-in preamp with a dedicated gain control knob and a 6-segment LED level meter.
USB PORT
A USB port enables firmware updates, file transfer, and allows the F8n Pro to be used as an 8-in/4-out USB audio interface operating at sample rates up to 32-bit float / 96kHz.
INPUTS
The F8n Pro provides 8 discrete inputs with locking Neutrik XLR/TRS combo connectors, allowing you to plug in any microphone, wireless pack, or line level device. Any input can also be used as a camera return.
SD CARD SLOTS
Record on two SD/SDHC/SDXC cards, up to 1 TB each, simultaneously, allowing you to instantly backup or split recordings.
HEADPHONE JACK
The unit’s 1/4" headphone jack also comes with dedicated volume control.
MAIN OUTPUTS
The F8n Pro provides four outputs: two Main Outs (on balanced TA3 mini-XLR jacks) for connection to external mixers and processing devices; and two Sub Outs (on a single unbalanced 1/8" stereo mini-jack) for connection to a camera. The F8n Pro also provides a selectable +4 dBu output.
DC POWER
The F8n Pro can be powered by a 9-18V external DC power supply.
TIME CODE IN/OUT
Timecode can be generated internally or transmitted from an external timecode generator.
10-PIN MIC CONNECTOR
Our proprietary 10-pin connector enables the use of interchangeable Zoom mic capsules, with optional extension cables that allow for remote positioning
INPUTS
INPUT 1 - 8 | Connectors: | XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot) |
INPUT SOURCE SET TO MIC (→ SETTING THE INPUT SOURCE (INPUT SOURCE)) | Input gain: | +10 – +75 dB |
Input impedance: | 3 kΩ or more | |
Maximum input level: | +4 dBu (at 0 dBFS) | |
Phantom power: | +24/+48 V, 10 mA maximum per channel | |
EQUIVALENT INPUT NOISE | −127 dBu or less (A-weighted, +75 dB input gain, 150 Ω input) | |
FREQUENCY RESPONSE | 20 Hz – 60 kHz, +0.5 dB/−1 kHz (192 kHz sample rate) | |
A/D DYNAMIC RANGE | 113 dB typ. (−60 dBFS input, A-weighted) | |
CROSSTALK | −90 dB or less (between adjacent channels, 1 kHz) | |
MIC IN | ZOOM mic capsule input (use disables Inputs 1/2) | |
SLATE MIC | Built-in mic for voice memos can be assigned to tracks freely |
OUTPUTS
MAIN OUT 1/2 | Connectors: | TA3 connectors (balanced output, 2: hot) |
Output impedance: | 150 Ω or less | |
Reference output level: | −10 dBV (normal output level) | |
+4 dBu (line output level) | ||
1 kHz, 600 Ω load | ||
Maximum output level: | +10 dBV (normal output level) | |
+24 dBu (line output level) | ||
1 kHz, 600 Ω load | ||
SUB OUT 1/2 | Connectors: | 3.5 mm stereo mini (unbalanced output) |
Output impedance: | 100 Ω or less | |
Reference output level: | −10 dBV (normal output level) | |
−40 dBu (mic output level) | ||
1 kHz, 10 kΩ load | ||
Maximum output level: | +10 dBV (normal output level) | |
HEADPHONE | Connector: | 1/4 inch stereo (unbalanced output) |
Output impedance: | 18 Ω or less | |
Maximum output level: | 100 mW + 100 mW (32 Ω load) | |
D/A DYNAMIC RANGE | 105 dB typ. (−60dBFS input, A-weighted) |
RECORDING MEDIA
Dual SD card slots: | SDHC cards: 4 GB – 32 GB | |
SDXC cards: 64 GB – 1 TB |
RECORDING FORMATS
WHEN WAV SELECTED | Supported formats: | 44.1, 47.952, 48, 48.048, 88.2, 96 and 192 kHz |
16-bit linear, 24-bit linear and 32-bit float | ||
Mono/stereo/2-10 ch poly | ||
BWF and iXML | ||
Maximum simultaneous recording tracks: | 10 (8 inputs + stereo mix) | |
8 (at 192 kHz sampling rate) | ||
WHEN MP3 SELECTED | Supported formats: | 128, 192 and 320 kbps |
44.1 and 48 kHz | ||
ID3v1 tags | ||
Maximum simultaneous recording tracks: | 2 |
RECORDING TIME
Using a 32GB card: | 23:08:00 (48 kHz/32-bit float stereo WAV) | |
5:47:00 (192 kHz/32-bit float stereo WAV) |
TIMECODE
Connector: | BNC | |
Modes: | Off, Int Free Run, Int Record Run, Int RTC Run, Ext and Ext Auto Rec (audio clock can be synchronized to timecode) | |
Frame rates: | 23.976ND, 24ND, 25ND, 29.97ND, 29.97D, 30ND and 30D | |
Precision: | ±0.2 ppm | |
Supported input levels: | 0.2 - 5.0 Vpp | |
Input impedance: | 4.6 kΩ | |
Output level: | 3.3 Vpp | |
Output impedance: | 50 Ω or less |
POWER SUPPLIES
AA batteries: | 8 (alkaline, nickel-metal hydride or lithium) | |
AC adapter: | ZOOM AD-19, DC 12 V/2 A, center plus | |
External DC power supply: | HIROSE HR10A-7R-4S 4-pin connector (1 pin: -, 4 pin: +), 9–18 V |
ESTIMATED CONTINUOUS RECORDING TIMES:
• THESE VALUES ARE ONLY ESTIMATES. | 2 channels to SD 1 48kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) MAIN/SUB OUT OFF, TIMECODE OFF, LED/LCD brightness 5, 32Ω headphones, PHANTOM OFF | Alkaline batteries: about 6 hours |
• THESE VALUES ARE BASED ON IN-HOUSE TESTING METHODS. | NiMH batteries (2500 mAh): about 8.5 hours | |
• THEY WILL VARY GREATLY ACCORDING TO USE CONDITIONS. | Lithium batteries: about 12 hours | |
8 channels to SD 1 48kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) MAIN/SUB OUT OFF, TIMECODE OFF, LED/LCD brightness 5, 32Ω headphones, PHANTOM OFF | Alkaline batteries: about 5 hours | |
NiMH batteries (2500 mAh): about 7 hours | ||
Lithium batteries: about 10 hours | ||
8 channels to SD 1/2 192kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) MAIN/SUB OUT ON, TIMECODE Int Free Run, LED/LCD brightness 60, 32Ω headphones, PHANTOM 48 V | Alkaline batteries: about 0.5 hours | |
NiMH batteries (2500 mAh): about 1.5 hours | ||
Lithium batteries: about 2.5 hours |
DISPLAY
2.4 inch full-color LCD (320 × 240) |
USB
Connector: | Mini-B | |
• Use a USB cable that supports data transfer. | ||
• USB bus power operation is not supported. | ||
MASS STORAGE OPERATION | Class: | USB 2.0 High Speed |
MULTI TRACK AUDIO INTERFACE MODE OPERATION (DRIVER REQUIRED FOR WINDOWS, NOT REQUIRED FOR MAC) | Class: | USB 2.0 High Speed |
Specifications: | Sampling rate: 44.1/48/88.2/96 kHz | |
Bit depth: 24-bit linear/32-bit float | ||
8-in/4-out | ||
STEREO MIX AUDIO INTERFACE MODE OPERATION (NO DRIVER REQUIRED) • SUPPORTS AUDIO INTERFACE OPERATION WITH IOS/IPADOS DEVICES | Class: | USB 2.0 Full Speed |
Specifications: | Sampling rate: 44.1/48 kHz | |
Bit depth: 16-bit linear | ||
2-in/2-out | ||
AUDIO INTERFACE OPERATION WITH RECORDING (DRIVER REQUIRED FOR WINDOWS, NOT REQUIRED FOR MAC) | Class: | USB 2.0 High Speed |
Specifications: | Sampling rate: 44.1/48 kHz | |
Bit depth: 24-bit linear/32-bit float | ||
10-in/4-out |
POWER CONSUMPTION: | 15 W | |
EXTERNAL DIMENSIONS: | 7.0 in. (W) × 5.5 in. (D) × 2.1 in. (H) | |
WEIGHT: (INCLUDING BATTERIES) | 1200 g | |
NOTE: 0 DBU = 0.775 VRMS |