Teradek Bolt 912 Bolt 300 HDMI Wireless RX

by Teradek
Verfügbarkeit: 7-10 days delivery
SKU
TRD-10-0912

The Teradek Bolt is a zero delay (< 1ms) wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 2,000ft over the unlicensed 5GHz band.

1.125,00 € 900,00 €

Paket beinhaltet

  • 1 x Thumb Screw 1.25 inch length (1/4"-20 inch)
  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 1 x SDI (BNC to BNC) Cable 10 inch
  • 1 x USB 3.0 Cable A to Micro B (3ft Length)
  • 1 x PSU 2-Pin Connector to 18W AC Adapter 6ft cable
  • 1 x HDMI 18in Cable (Type A to Type A)

The Teradek Bolt 300 HDMI Wireless Video Receiver accepts lossless video transmissions from a Bolt 300 transmitter up to 300 feet away in optimal line-of-sight situations. The Bolt system supports uncompressed video resolutions up to 1080p at 60 fps with 4:2:2 chroma subsampling. Because the Bolt system uses the 5 GHz wavelength, it does not require FCC licensing. Aside from being able to output video via HDMI, the USB 3.0 port can stream the uncompressed video directly to a PC for recording with the GRAB Engine. Included with this transmitter is a 1/4"-20 thumb screw to mount the unit to a video rig and a 1/2"-20 adapter to secure the unit to a small light stand.

Video Resolution 1080p: 60/59.94/50/30/29.97/25/24/23.98
1080psf: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
SD: 480i(NTSC)/576i(PAL)
Color Sampling Y:Cb:Cr/4:2:2, 8-bit (10-bit with no format conversion and FPGA v.1.1.0 or later)
Inputs N/A
Outputs 1 x HDMI
1 x USB 3.0 micro B port
Delay <1 ms (when no video format conversion is enabled)
Audio Format 24-bit 48kHz PCM
Frequencies Non-DFS: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
DFS: 5.27 to 5.55 GHz, 5.67 GHz
RF Power 15 dBm EIRP
Range Up to 300' line of sight
Power Input 2-pin LEMO 7-28 VDC
Power Consumption 8.2 W
Operating Temperature 32 to 122°F / 0 to 50°C
Dimensions 1 x 3.5 x 5.8" / 25.2 x 88.9 x 146.5 mm
Weight 12.2 oz / 346 g
Vorgestellte Produkte