Sennheiser MKE 600

by Sennheiser
Verfügbarkeit: Auf Lager
SKU
SEN-505453

Shotgun microphone ideal for video camera applications. Maximal rejection of side noise thanks to pronounced directivity. "Low Cut"-Filter minimizes wind noise. Very good suppression of structure-borne noise.

298,75 € 239,00 €

Paket beinhaltet

  • 1 x Sennheiser MKE 600 - Shotgun Microphone
  • 1 x Shock Mount for Camera Light-Shoe
  • 1 x Foam Windshield
  • 1 x Carry Pouch

The MKE 600 from Sennheiser is a shotgun microphone designed for use with a camcorder or video DSLR. Building on the company's extensive expertise in designing shotgun microphones, it is able to take on even the toughest video sound challenges, while still being compact and short relative to previous models. With its high level of directivity, the microphone focuses on the sounds in front of the camera, while attenuating unwanted sound coming from the sides and rear.

An included foam windshield reduces the effect of wind noise, while a switchable low-cut filter adds additional wind and handling noise attenuation. The MKE 600 can be phantom powered or operated on an AA battery for about 150 hours. An integrated camera shoe and shock mount provides convenient on camera mounting. The rugged and all metal housing means the microphone will function perfectly in outdoor recording situations.

Flexible use on any camera due to compact form
Exceptional directivity
Maximum rejection of side noise
Switchable low-cut filter
Phantom or battery powering
Battery switch with "Low Batt" indicator
All-metal housing
Very good suppression of structure-borne noise
Minimizes wind and handling noise
Supplied with foam windshield and shock mount
Effective wind noise suppression with optional blimp

Polar Pattern Super-cardioid/Lobar
Frequency Response 40 Hz to 20 kHz
Sensitivity -21 mV/Pa with 48 V powering
-19 mV/Pa with battery powering
Maximum Sound Pressure Level (SPL) 132 dB with 48 V powering
126 dB with battery powering
EIN 15 dB(A) with 48 V powering
16 dB(A) with battery powering
Low Frequency Roll-Off Yes
Power Requirements 48 V +/-4 V (P48, IEC 61938) via XLR-3 or AA size battery/rechargeable battery (1.5/1.2 V)
Current Consumption 4.4 mA with P48 powering
Battery Operation Times Approximately 150 hours
"Low Batt" Indicator: <1.05 V with approximately 8 hours of remaining operating time after initial display
Output Connectors 1 x XLR
Operating Temperature -14 to 140°F (-10 to 60°C)
Dimensions Diameter: 0.8" (20 mm)
Length: 10.1" (256 mm)
Weight 4.5 oz (128 g) without battery
Vorgestellte Produkte